A Certificate of Analysis (COA) is an independent laboratory report that confirms what’s in a supplement and checks it meets safety and quality limits. This guide shows you how to match a COA to the exact product and batch you’re buying, how to read the numbers, what to question, and where a COA fits alongside other UK checks. Swiss Peak Health is a British brand based in Liverpool, and our supplements are made in the UK for UK customers with third‑party testing. If you prefer to check a COA before you buy, this guide is for you.
The quick answer: what to check first on any COA
- Exact product match: Brand name, product name, format (e.g., gummies, capsules, oil), strength/serving and pack size should match the label you’re buying.
- Batch/lot number: The COA must show the same batch (or lot) code printed on your bottle or pouch.
- Test date and sample date: Recent enough to be relevant and aligned to that batch. Avoid reports with no dates.
- Laboratory identity: The lab’s name and address are shown. Prefer labs accredited to ISO/IEC 17025 for the tests reported; this standard demonstrates competence in testing and measurement (UKAS on ISO/IEC 17025).
- Methods and specification limits: The COA should state the method used (e.g., HPLC for actives; ICP‑MS for heavy metals) and the pass/fail specification for each test.
- Sign‑off: A named signatory or authorised lab approval, with report number and pages intact.
How to match the COA to the product you’re buying
Everything must line up. If even one of these identifiers differs, ask for the correct report before you buy.
- Product identification: Name, format and labelled strength (for botanicals, check concentrated extracts vs “equivalent” amounts – see Extract Ratios and Equivalent Amounts: Reading the Numbers).
- Batch/lot: A short alphanumeric code printed on your pack. The same code must appear on the COA. If a website only states “third‑party tested” without showing batch‑linked reports, compare claims vs evidence with Batch Testing vs General Testing Statements.
- Dates: Look for the date sampled or manufacture date and the date reported. COAs should relate to the same production run as the product you receive.
- Lab details: A legitimate lab lists its address and reference number. If the report mentions accreditation, you can check the standard (e.g., ISO/IEC 17025) via UKAS information.
Measured result vs specification limit: what the numbers mean
Every COA line item has two parts: the measured result (what the lab found) and the specification (the pass/fail limit set for quality or safety). A result meets spec if it is inside that limit or range.
| Test area | What to look for | Where it appears | Why it matters |
|---|---|---|---|
| Identity & strength | Active ingredient present at the stated amount per serving or within the product’s acceptance range; method named (e.g., HPLC). | “Assay”, “Potency” or “Content” line with units (mg per serving or %). | Confirms label accuracy for what you’re paying for. |
| Contaminants: heavy metals | Lead, arsenic, cadmium, mercury below the specification limit; method named (e.g., ICP‑MS). | List of elements with µg/kg (ppb) or mg/kg (ppm), plus pass/fail. | Safety check; should be below stated limits. |
| Microbiology | Total viable count, yeasts/moulds, and absence of pathogens at or under limits. | CFU/g results with acceptance criteria. | Helps confirm hygienic production and storage. |
| Allergens/undeclared actives | Where relevant, confirmation of absence below the reporting limit. | “Not detected” (ND) or a quantified value with a low detection limit. | Reduces risk of undeclared ingredients. |
Which tests matter for your product type?
Different formats need different checks. Use this as a practical guide:
- Botanical capsules and tablets: Identity and active assay; heavy metals; microbiology; sometimes solvent residues if extracts are used.
- Gummies: Active assay per gummy; sugar/acid levels where relevant; micro; heavy metals.
- Oils and tinctures (including hemp‑derived products): Active assay; oxidation markers; contaminants. For CBD sold as a food supplement in Great Britain, see consumer advice from the regulator (Food Standards Agency CBD advice), and for lab‑report specifics read How to Read a CBD Lab Report.
How to spot red flags on a COA
- No batch code or mismatched product details: A generic “example report” isn’t enough for purchase decisions.
- Missing methods or limits: You need both the measured result and the specification to judge quality.
- Old reports reused: Reports should be relevant to the batch being sold now, not a historic lot.
- Unclear or non‑independent testing: Marketing claims must be supported by appropriate evidence in line with the CAP Code for foods and supplements (ASA/CAP Code Section 15).
Step‑by‑step: read a COA like a UK buyer
- Open the full PDF and check the product name, format and strength match the product page or label in your basket.
- Find the batch/lot code on the COA and on your pack. They must match.
- Scan the test list for identity/assay, contaminants (heavy metals, microbes) and any format‑specific checks.
- Read method and units so you understand what was measured and how.
- Compare results to specification to confirm “Pass” genuinely means within a stated limit.
- Confirm lab credentials and, where stated, whether tests are under ISO/IEC 17025 scope (see UKAS overview for what that means).
- Save the report or note the report ID for future reference.
Does this COA apply to your product? A quick decision grid
| Your check | If “Yes” | If “No” |
|---|---|---|
| Product name/format/strength match? | Proceed to batch check. | Ask the retailer for the correct report for the exact product you’re buying. |
| Batch/lot on COA equals pack batch? | Proceed to date and methods. | Do not rely on the COA; request the right batch report. |
| Recent test/report dates? | Proceed to results vs limits. | Query whether stock is from the same lot, or request a current COA. |
| Methods and limits clearly stated? | Use results to confirm quality and safety fit. | Insist on full methods/limits or choose a brand that provides them. |
Where a COA fits alongside other UK quality signals
- Accredited testing competence: ISO/IEC 17025 accreditation demonstrates a lab’s technical competence and quality system for testing and calibration (UKAS on laboratory accreditation).
- Responsible UK marketing: Brands must hold evidence for nutrition/health claims in line with the CAP Code (ASA/CAP). If a COA is cited as evidence, it needs to be specific and relevant.
- Product label and site consistency: If the label and website differ, resolve it before buying with Label and Website Discrepancies: What to Do Before Buying.
- Broader testing literacy: For a one‑page tour of UK evidence and verification steps, see Supplement Quality, Testing and Label Verification: A UK Buyer’s Hub Guide and an explainer of trust cues in “Natural”, “Pure” and “Premium”: Which Claims Help You Choose?.
How this helps you choose a Swiss Peak product
Swiss Peak is a UK brand based in Liverpool, with UK‑made supplements and transparent testing. If you’re comparing a botanical capsule routine, check that the COA batch ID matches the bottle. For example, if you’re planning a multi‑month routine with berberine, confirm identity/assay, heavy metals and micro on the batch report before you buy; then consider convenience and value by looking at the two‑bottle option in Berberine Two Pack.
If you’re starting with hemp‑derived formats and want an entry point, look for batch‑specific potency and contaminant reports before purchase; a starter format such as the CBD Essential Starter Kit is designed for beginners to compare formats. For a broader daily stack where multiple active ingredients are involved, check that each product in the bundle has its own batch‑linked COA before comparing value in the Metabolic Stack.
Orders over £50 placed before the weekday cut‑off qualify for free next‑day UK delivery; check the live cut‑off on the shipping page at checkout for precise timing.
- Berberine Two Pack — Two-bottle berberine option for longer routines, with batch ID on the COA so you can confirm identity, assay and contaminant results.
- CBD Essential Starter Kit — A beginner hemp-derived kit with batch-specific potency and contaminant reports so you can verify COAs before buying.
- Metabolic Stack Bundle — A metabolic supplement bundle whose components have batch reports you can check to confirm potency and contaminants for a multi-supplement routine.
Frequently Asked Questions
Is a PDF on a website enough proof?
Yes—if it’s a complete, legible lab report for the same batch you’ll receive, with product details, batch/lot, dates, methods, limits, results and a lab sign‑off. Screenshots without identifiers aren’t sufficient.
How close should potency be to the label?
Look for an identity/assay result that meets the product’s stated specification range. A credible COA shows both the measured result and the acceptance limit so you can judge pass/fail. Avoid products that quote a percentage only, without the method or limit.
What does ISO/IEC 17025 mean on a COA?
It signals that the lab’s competence in testing and measurement has been assessed against an international standard for testing and calibration laboratories. It’s a strong indicator of reliable methods and measurement control (UKAS overview).
Do CBD products need anything special on a COA?
In addition to potency and common safety checks, UK buyers should read current consumer advice about CBD as a food and expect batch‑specific, method‑named reports from credible labs (Food Standards Agency CBD advice). For details, see How to Read a CBD Lab Report.
Next steps
Want a wider quality checklist before you buy? Start with How to Assess Supplement Quality Before Buying Online. If you’re comparing direct‑from‑brand vs marketplace orders, see Buying Supplements from a Brand Website vs a Marketplace. If your choice involves concentrated extracts or “equivalent” amounts, read Extract Ratios and Equivalent Amounts: Reading the Numbers before deciding.