Shopping for herbal supplements in the UK often means decoding two different numbers on the label: an extract ratio (for example 10:1) and an equivalent amount (for example “500 mg extract, equivalent to 5,000 mg herb”). If you only look at the big headline number, it’s easy to misunderstand strength and value. This guide explains how to read those figures, compare products fairly, and choose a transparent, UK‑made option. Swiss Peak Health is a British brand based in Liverpool; our supplements are made in Britain and shipped UK‑wide with free next‑day delivery on qualifying orders over £50, so the examples below use our current label style for clarity.
Quick answer: how to read extract ratios and equivalent amounts
- Extract ratio (e.g., 10:1): How much raw plant was used to make a given weight of extract. 10:1 means 10 parts plant became 1 part extract.
- Extract weight: The actual mass of extract in your capsule or tablet (for example 500 mg).
- Equivalent amount: A back‑calculated figure showing how much raw plant the extract corresponds to (for example 500 mg of a 10:1 extract is equivalent to 5,000 mg of dried herb). This is not the weight of material you swallow.
- Comparison rule of thumb: To compare two products with different ratios, line them up by either the actual extract per daily serving or the equivalent raw herb—and keep serving sizes the same.
What does “10:1 extract” actually mean?
An extract ratio tells you the concentration step from raw plant to finished extract. A 10:1 extract is ten times as concentrated by weight as the original dried herb. If your serving contains 500 mg of a 10:1 extract, that equals 5,000 mg of the dried plant material it was made from.
Here’s a real‑world example that many shoppers ask about: the Swiss Peak berberine formula uses a highly concentrated extract so a manageable capsule size can deliver a meaningful serving. On our product page, you’ll see both the extract strength and the equivalent plant amount explained. If you’re comparing berberine across brands, always check those two figures against the daily serving stated on the label. For a clear label example, see Berberine 5250mg Capsules | 90 Servings.
Is the equivalent amount the same as the extract weight?
No. The extract weight is the real quantity of extract you ingest. The equivalent amount is a helpful conversion that shows the raw herb input. For like‑for‑like decisions—such as price per daily serving—use the actual extract per serving. For potency comparisons across different ratios, the equivalent amount can help normalise products, but it shouldn’t replace the extract weight when judging value.
Can you compare different extract ratios directly?
Yes, but make sure you compare on a common basis:
- Method A — by extract weight per daily serving: Works when extracts are prepared to similar specifications and you only need to understand how much extract you’re taking.
- Method B — by equivalent raw herb: Useful for a simple "how much plant does this represent?" view. Calculate: extract weight × ratio (for example 500 mg × 10 = 5,000 mg equivalent).
- Method C — by standardised active compounds: Best when labels declare a named constituent (for example a % of a defined alkaloid). If one product is a 10:1 extract at 50% actives and another is 20:1 at 20% actives, the raw‑herb equivalent alone won’t tell you which delivers more of the active component.
What’s missing when a label shows only a big headline number?
If a pack shouts “5,000 mg” without context, ask:
- Is that the extract weight or a raw‑herb equivalent? Reputable labels make this explicit and show the extract ratio.
- What’s the serving size? That “5,000 mg” might assume two or three capsules; always compare per daily serving.
- Is any active compound standardised? If actives are relevant to the ingredient category, look for a specific percentage rather than vague wording.
- Can you verify the claim? UK advertising rules require objective comparisons and claims to be clear and verifiable; headline claims must not mislead or exaggerate. See the CAP Code guidance for foods and food supplements at ASA/CAP Section 15 and their practical advice on nutrition claims at ASA AdviceOnline.
Whole herb vs concentrated extracts: a quick comparison
Use this table to translate label numbers into like‑for‑like terms. Examples assume a 500 mg extract capsule where relevant.
| Option | Typical label example | Extract ratio | Actual extract per serving | Equivalent dried herb | Pros | Trade‑offs |
|---|---|---|---|---|---|---|
| Whole herb powder | 1,000 mg powder (no ratio) | Not an extract | 0 mg extract | 1,000 mg herb | Straightforward; minimal processing | Bulkier servings; variable actives |
| 10:1 extract | 500 mg extract (equiv. 5,000 mg herb) | 10:1 | 500 mg | 5,000 mg | Smaller dose for higher plant input | Quality depends on extraction & standardisation |
| 20:1 extract | 500 mg extract (equiv. 10,000 mg herb) | 20:1 | 500 mg | 10,000 mg | Very compact serving for high input | Ratio alone doesn’t confirm active % |
How Swiss Peak Health presents extract information
As a UK brand based in Liverpool, we state extract ratio, actual extract per serving and the equivalent plant input where relevant, using plain UK English and metric units. For example, our Berberine 5250mg Capsules | 90 Servings explain the concentrated extract and the equivalent plant amount so you can compare by serving and by value without guesswork. For single‑compound or mineral products where ratios aren’t relevant, we show the straightforward per‑serving amount—see NMN = NAD+ Supplement (600mg per Serving) and Magnesium Tablets 750mg as examples of clear, per‑serving labels.
When you review labels, it also helps to understand how claims are regulated in Great Britain. Marketing for food supplements must stick to authorised nutrition and health claims and be presented clearly—see ASA/CAP Section 15. For general labelling duties (like ingredient lists and mandatory statements), see the Food Standards Agency’s overview of food supplement labelling requirements at FSA guidance.
How to compare two products in under a minute
- Find the daily serving. Keep comparisons per day, not per capsule if serving sizes differ.
- Note the extract weight and ratio. If only an equivalent amount is shown, calculate extract weight = equivalent ÷ ratio.
- Check for standardisation. Look for a declared % of a relevant active where appropriate to the ingredient category.
- Work out price per daily serving. This is the fairest value metric when strengths and servings differ.
- Verify testing and origin. Prefer UK‑made products with accessible batch testing and clear contact details. For practical checks, see “Natural”, “Pure” and “Premium”: Which Claims Help You Choose? and Label and Website Discrepancies: What to Do Before Buying.
- Berberine 5250mg Capsules | 90 Servings — Clear per‑serving amount and full serving count so you can calculate price per day and verify declared extract details.
Common pitfalls and how to avoid them
- Headline numbers without a ratio. If you see a very large mg number but no 10:1 or 20:1 (and no extract weight), you can’t judge strength fairly. UK ad rules expect comparisons to be material, relevant, verifiable and not misleading—see ASA nutrition‑claims guidance.
- Mixing formats. Don’t compare one brand’s whole herb powder to another’s 20:1 extract without converting to a common basis.
- Ignoring the serving. A product can look strong per capsule but require three capsules per day.
- Assuming higher ratio always means better. Ratio is about concentration, not necessarily a higher percentage of the active constituent. Look for standardisation detail where it’s meaningful to the ingredient.
- Unverifiable claims. If a claim matters to your purchase, you should be able to verify it from accessible information. If not, treat the comparison with caution.
Which option is right for you?
- Prefer compact servings and clear potency? A concentrated, clearly labelled extract suits most shoppers who value smaller daily doses. If you want a berberine example presented with extract ratio and equivalent plant input, see Berberine 5250mg Capsules | 90 Servings.
- Prefer single‑compound clarity with no extract math? Choose products that state a precise per‑serving amount without ratios, such as NMN = NAD+ Supplement (600mg per Serving) or Magnesium Tablets 750mg.
For more ways to judge transparency and fit before you buy, you might also find Buying Supplements from a Brand Website vs a Marketplace helpful.
Frequently Asked Questions
Do I swallow the “equivalent to 5,000 mg” amount?
No. You swallow the extract weight (for example 500 mg). The “equivalent” figure just shows how much dried plant was used to make that extract based on the ratio.
What if a label lists a big mg number but no ratio?
Ask the seller whether it’s extract weight or a raw‑herb equivalent and what the serving size is. If they can’t confirm, you can’t make a fair comparison. Advertising guidance in the UK expects claims and comparisons to be clear and verifiable; vague headline numbers risk misleading shoppers—see ASA/CAP Section 15.
Is a higher extract ratio always better?
Not necessarily. A higher ratio shows more concentration, but the meaningful part can be the level of a named active compound and the quality of extraction. Two different extracts with the same raw‑herb equivalent can still deliver different amounts of a given active.
Where can I check the basic labelling rules for supplements in Great Britain?
The Food Standards Agency signposts the core labelling framework for food supplements placed on the GB market (FIC plus the Food Supplements Regulations). See the FSA’s overview at FSA guidance. If you have a medical condition, take medicines, are pregnant or breastfeeding, speak to a GP or pharmacist before using a supplement.
Next steps
Pick one product you’re considering and run the 60‑second check above. If you value clear extract ratios, real per‑serving amounts and UK manufacturing with accessible batch information, compare our labels—starting with Berberine 5250mg Capsules | 90 Servings, then view single‑compound examples like NMN = NAD+ Supplement (600mg per Serving) and Magnesium Tablets 750mg. If anything on a label or website doesn’t match, this guide on resolving differences before you buy can help: Label and Website Discrepancies: What to Do Before Buying.